TL;DR: High-Brightness Payment Terminal Display with 5G Modem
AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Turkiye. The WF-SPT-07 smart payment terminal Android motherboard covers the legacy Android 11 payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 5.5-inch 720x1280 LVDS capacitive touch panel, and Android 11 with AOSP baseline firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Turkiye importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. Aan international market buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. The Turkiye partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.
WF-SPT-07 Technical Specifications
| Parameter | AndroidSBC WF-SPT-07 (legacy Android 11 payment terminal build) | Industry Average |
|---|---|---|
| Processor | RK3288 quad-core ARM Cortex-A17 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-T764 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR3 | DDR3 512MB or 1GB on competing boards |
| Storage | 8GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 5.5-inch 720x1280 LVDS capacitive touch panel with 5-point capacitive touch | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, magnetic stripe and IC card with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 58mm thermal printer header with 80mm per second output | No printer control header on competing boards |
| Wireless and positioning | single-band WiFi 802.11 b/g/n with Bluetooth 4.2 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB host, 1 USB OTG, 2 TTL UART, 4 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 11 with AOSP baseline | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC barrel input with 5V/2A peripheral rail and RTC backup, 0C to 45C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-07 (legacy Android 11 payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Turkiye importers sourcing the WF-SPT family, the WF-SPT-07-A variant is the typical configuration for the replacement board for an installed terminal estate use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Turkiye Buyers
The hidden cost in Turkiye rollouts is the integration labour, not the silicon. A board that arrives with a validated printer profile, a documented scan mapping and an SDK that matches the shipped image removes weeks from aan international market project plan.
The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: BTK type approval with TSE safety conformity reports, BTK / TSE conformity, the compliance set for Turkiye and a fixed bill of materials, all shipped with the first lot. AndroidSBC quotes 78800 boards against a published price list, holds the configuration for the length of the agreement, and ships on the international market - Shanghai lane with the test report and the signed firmware image in the same carton for international market.
Competitive Comparison: WF-SPT-07 vs Competing Smart Payment Terminal Motherboards
A Turkiye integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so aan international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Turkiye integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Turkiye, so the board is specified around the reader and the camera first and the keypad second.
- Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
The Turkiye demand curve rewards the vendor who can hold a configuration. AndroidSBC treats a frozen bill of materials as the product feature that matters most to aan international market integrator with an estate to maintain.
WF-SPT-07 Application Scenarios
The WF-SPT-07 legacy Android 11 payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-07-A configuration is the typical build for the replacement board for an installed terminal estate use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-04 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
These are the three structures that Turkiye partners actually sign, with the engineering scope and the documentation set attached to each one.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps a Turkiye estate serviceable through growth.
Frequently Asked Questions
Does the smart payment terminal board family support a legacy 11 payment terminal build?
Answer: Yes. AndroidSBC holds the legacy 11 payment terminal build as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.
Which configurations are available in the WF-SPT family for Turkiye buyers?
Answer: Buyers in Turkiye can specify RK3288 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in Turkiye.
What payment scheme certification support does AndroidSBC provide for Turkiye?
Answer: Scheme certification in Turkiye is handled as documentation work: BTK type approval with TSE safety conformity testing, BTK / TSE conformity and a signed firmware image, all matched to the configuration code shipped to international market.
What is the minimum order quantity and the sample lead time for Turkiye?
Answer: AndroidSBC publishes the price list by configuration and volume tier, quotes international market sample orders in 1-3 days, and holds production capacity at 5000 boards per week for Turkiye rollouts.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.
How are firmware updates delivered to a Turkiye device estate after deployment?
Answer: Staged OTA groups are created during qualification, so the international market estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.
What shipping terms does AndroidSBC support for Turkiye orders?
Answer: AndroidSBC ships EXW, FOB Shenzhen, CIF and DAP terms, with Port of international market as the standard discharge port for Turkiye orders and the compliance file attached to the carton.
Contact AndroidSBC: Start Your WF-SPT-07 Sourcing Conversation
The Turkiye desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Wanlin Manufacturing Group, through its AndroidSBC export brand, is the source factory behind the WF-SPT family and is appointing local partners across Turkiye. Volume pricing, private-label terms and joint qualification slots for international market are open now.